Polyacetal (POM C)

Polyacetals are highly crystalline thermoplastics, characterised by their high mechanical strength, rigidity and impact resistance. Acetal absorbs very little moisture, enabling the product to maintain constant physical properties in a variety of changing environments. POM exhibits excellent dimensional stability and is ideally suited to close tolerance of mechanical parts.

Key characteristics

  • High mechanical strength and rigidity
  • High impact strength and creep resistance
  • Excellent dimensional stability and machinability
  • Low moisture absorptlon
  • Good electrical insulating and dielectric properties
  • No centreline porosity in copolymer grades
  • Suitable for food contact


Standard extruded

Polyoxymethylene (Polyacetal) grades):


POM C (Acetal copolymer, natural, black, various)
The copolymer grade is the ideal combination of strength, stiffness and wear resistance. It absorbs very little moisture, is easily machinable and is genuinely porosity-free, making it the preferred grade for food contact and medical applications. The product exhibits an elevated resistance to hydrolysis, strong alkalis and thermal-oxidative degradation when compared to acetal homopolymer.

POM CPE (Acetal copolymer + PE) (blue)
Self-lubrication is achieved by the incorporation of ultra-high molecular weight polyethylene to the copolymer grade, improving sliding, dry-running and abrasion resistance properties. The material also has extremely low moisture absorption, helping to improve component dimensional stability.

POM C GF (Acetal copolymer + 30% glass fibre) (white, black)
This copolymer grade is reinforced with glass fibre to achieve greater mechanical strength, rigidity and dimensional stability. The material also exhibits higher heat resistant properties.

POM H Acetal Homopolymer (Delrin®) (white, black)
The homopolymer grade exhibits slightly higher mechanical properties, illustrated in the hardness, rigidity and creep resistance. The material also demonstrates elevated wear resistance and has a lower thermal expansion rate than acetal copolymer.

POM HT Acetal Homopolymer + PTFE (Delrin®) (brown)
The inclusion of Teflon® fibres uniformly dispersed in the compound improves the products frictional and sliding capabilities, improving wear and stick/slip behaviour.

Rods

Polyacetal Rods extruded

Length: 3000 mm; 0/+ 90 mm

 

Diameter (mm)

 

 Tolerance (DIN 16980 / mm)

Weight ca. Kg/m

5 1) + 0,1 / + 0,4 0,031
6 1)   0,044
8 1) + 0,1 / + 0,5 0,078
10 1)   0,120
12   + 0,2 / + 0,7 0,175
14 1)   0,236
15 1)   0,270
16     0,306
18     0,386
20     0,474
22 1) + 0,2 / + 0,9 0,574
25     0,737
28 1)   0,920
30     1,06
32 1) + 0,2 / +1,1 1,20
35     1,44
38 1)   1,69
40     1,87
45   + 0,3 / + 1,3 2,37
50     2,92
57     3,77
60   + 0,3 / + 1,6 4,20
65     4,92
70     5,69
75 1) + 0,4 / + 2,0 6,56
80     7,46
85 1) + 0,4 / + 2,2 8,42
90     9,43
95 1) + 0,6 / + 2,5 10,53
100     11,65
110   + 0,7 / + 3,0 14,15
115 1) + 0,8 / + 3,5 15,50
120     16,90
125 1)   18,26
130   + 0,9 / + 3,8 19,80
140     22,90
150   + 1,0 / + 4,2 26,35
160   + 1,1 / + 4,5 29,94
170 1) + 1,2 / + 5,0 22,85
180     37,90
200   + 1,3 / + 5,5 46,74
210 1) 2)   51,52
220 1) 2)   56,61
230 1) 2) + 1,5 / + 6,2 61,78
240 1) 2)   67,18
250 1) 2)   72,80
260 1) 2) + 1,6 / + 6,5 78,77
270 1) 2)   84,84
280 1) 2)   91,15
300 1) 2) + 1,7 / + 7,0 104,64


1) Non stock sizes (manufactured to order)

2) Standard-length: 1000 mm

Dimensions are as well available in black color

 

 

 

 

Sheets

Polyacetal Sheets extruded

Length: 2000/3000 mm; 0/+ 90 mm

Width: 1000/1220 mm; +5/+ 25 mm

 

Diameter (mm)

  

Tolerance (DIN 16986 / mm)

Weight ca. Kg/m (2000 x 1000 mm)

Weight ca. Kg/m (3000 x 1220 mm)
8   + 0,2 / + 0,9 12,60 15,31
10   + 0,3 / +1,5 15,55 18,89
12     19,02 23,1
15 1)   23,44 28,47
16     24,91 30,26
18 1)   27,86 33,84
20     30,81 37,42
22 1)   33,76 41,00
25     38,18 46,38
28 1)   43,49 52,82
30   + 0,5 / + 2,5 46,44 56,4
35     53,81 65,36
38 1)   58,23 70,73
40     61,18 74,31
45 1)   68,55 83,26
50     75,92 92,21
60 4) + 0,5 / + 3,5 91,40 91,40
70 4)   106,14 106,14
80 3) 4) + 0,5 / + 5,0 121,99 121,99
90 1) 3) 4)   136,73 136,73
100 3) 4)   151,47 151,47
110 2) 3) + 1,0 / + 6,0 101,61 101,61
120 2) 3)   110,57 110,57

 

1) Non stock sizes (manufacturedto order)

2) special product in 610 mm width (manufactured to order)

4) Standard-width: 1000 mm

4) 3) Adjusted length at 80 mm thicknes: 2440 mm

All Dimensions are as well available in black color

 

 

 

 

Hollow Rods

Polyacetal Hollow Rods extruded

Length: 3000 mm; 0/+ 90 mm

 

Diameter (mm)

 

 Tolerance (DIN 16980 / mm)

Weight ca. Kg/m

20/10 1)1) + 0,4 / + 1,1 0,388
25/12 1) - 0,4 / - 1,1 0,605
30/20 1)   0,645
40/20 1) 2) + 0,6 / + 2,0 1,520
40/30 1) - 0,6 / - 2,0 0,990
50/30 1)   2,030
56/35 1) + 0,8 / + 2,5 2,360
60/30 1) 2) - 0,8 / - 2,5 3,370
60/40 1)   2,620
60/50 1)   1,640
70/30 1) + 0,8 / + 3,0 4,970
    - 0,8 / - 4,5  
70/50 1) + 0,8 / + 3,0 3,210
80/40 1) - 0,8 / - 3,0 5,910
80/60 1)   3,750
90/50 1) + 1,2 / + 3,6 7,150
100/50 1) + 1,2 / + 5,0 9,33
100/80 1)   5,17
110/50 1) + 1,5 / + 4,5 11,749
125/50 1) - 2,0 / - 6,5 16,05
125/80 1)   11,95
150/100 1)   16,00
160/100 1) + 1,8 / + 5,4 19,91
180/140 1) - 2,2 / - 7,5 17,359
200/150 1) + 2,0 / + 6,0 23,31
    - 3,0 / + 8,5  
225/175 1) + 3,0 / + 9,0 28,45
250/150 1) - 2,0 / - 12,0 50,85
250/200 1)   32,00
280/200 1) + 3,0 / + 11,0 50,90
320/150 1) - 3,5 / - 14,0 97,95
320/200 1)   79,70
350/200 1)   102,30
350/300 1)   46,55


1) Sonderproduktion erforderlich

2) in black color

 

 

 

 

Download: Product Range

Contact

ADvanced Plastics GmbH & Co. KG
Poststraße 21
D-33181 Fürstenberg

Tel: +49 2953-9666-21
Fax: +49 29539666-22
Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Supplier of semi-finished products and drawing parts made from technical plastics

Imprint  | Data privacy

Address

ADvanced Plastics GmbH & Co. KG
Poststraße 21
D-33181 Fürstenberg

Contact

Tel: +49 2953-9666-21
Fax: +49 29539666-22
Mail: info@ad-plast.de